The MATX4001 module is a general
purpose-switching matrix, consisting of 40 relays
arranged in 5 rows by 8 columns. Each row/column
consists of independent Force/Sense lines that
are switched simultaneously. Each relay is
capable of handling 1 Amp and can isolate up to 5
KV. Each relay on the matrix is
independently controlled with an On/Off command
via software. Additionally, there are four lines
that may be used to control relays on the DUT
board. To use these lines, the positive side of
the relay coil may be connected to the voltage
needed (must be between 5 V and 24 V), and the
other side of the coil is connected to the chosen
line. Each line is controlled by an independent
On/Off command from the software. Issuing an
"On" command drives this line low,
energizing the relay. Issuing an "Off"
command drives this line high, turning off the
relay.
Specifications
Matrix
Specifications*
Number of Rows
5
Number of Columns
8
Number of Contacts per Matrix
Point
2 - Force & Sense
Maximum Voltage
250 V
Maximum Current
1 A
Mechanical Life
>10 Million Operations
Isolation between Contacts
> 1000 V
Isolation Coil to Contacts
> 5000 V
Mechanical Bounce
<1 ms
Relay
Drive Lines Specifications
Number of Lines
4
Sink Current
100 mA Max
Vil
0.8 V Max
*All
specifications are subject to change without notice.
