The MATX4010 module is a general
purpose-switching matrix, consisting of 40 relays
arranged in 5 rows by 8 columns. Each row/column
consists of independent Force/Sense lines that
are switched simultaneously. Each relay is
capable of handling 10 Amps and can isolate up to
5 KV. Each relay on the matrix is independently
controlled with an On/Off command via software.
Additionally, there are four lines that may be
used to control relays on the DUT board. To use
these lines, the positive side of the relay coil
may be connected to the voltage needed (must be
between 5 V and 24 V), and the other side of the
coil is connected to the chosen line. Each line
is controlled by an independent On/Off command
from the software. Issuing an "On"
command drives this line low, energizing the
relay. Issuing an "Off" command drives
this line high, turning off the relay.
Specifications
Matrix
Specifications*
Number of Rows
5
Number of Columns
8
Number of Contacts per Matrix
Point
2 - Force & Sense
Maximum Voltage
250 V
Maximum Current
10 A
Mechanical Life
>10 Million operations
Isolation between Contacts
>1000 V
Isolation Coil to Contacts
> 5000 V
Mechanical Bounce
<15 ms
Relay
Drive Lines Specifications
Number of Lines
4
Sink Current
100 mA Max
Vil
0.8 V Max
*All
specifications are subject to change without notice.
